|
1. Sonix-100 Chlorinator :
Sonix-100 Chlorinator is easy to mount directly
on the valve of a chlorine cylinder/tonner. Direct mounting
results in an all vacuum operation. There are no lines or components
carrying chlorine gas under pressure.
Features
* World-wide applications at a down-to-earth price.
* Mounts directly on a cylinder, can also be ton-container mounted.
* Six capacities upto 100 pounds per day i.e 2 kg/hr.
* Easy to install, operate and service.
* Available from stocking distributors and
backed by factory-trained and authorized service personnel.
2. S-10K Gas Chlorinator :
The S10K Chlorinator is an all-vacuum operated,
direct cylinder-mounted unit. It puts the vacuum-regulating
valve right at the gas source and reduces gas pressure to a
vacuum. The S10K features positive indication of cylinder status
user-friendly controls, capacities to 10 Kg/hour and local or
remote three-inch or five-inch scale rotameters.
Features
* Sonic-operated with maximum capacities of 4 Kg/hour and 10 Kg/hour
(3" and 5")
* Detachable rotameters available
* Positive indication of operating status
* Positive shut-off
* Unique secondary check
* Built-in automatic switch over
* Captive-yoke mounting
* Handles all water-treatment gases
3. V-2000 Wall-Mounted Chlorinator :
Features
* Capacities up to 1350 Kg/day with space-saving, wall-mounted
design
* Large, easy-to read 10" rotameter
* Total front access to all internal components via lift-off
panel
* Integrally mounted automatic controls
* All vacuum operation, using reliable V-notch, gas-flow control
* Rugged, flame-retardant enclosure
* Avaliable for Cl2, NH3, SO2 or CO2 feeding
4. V-2000 Floor-Mounted Chlorinator :
Features
* Modular, floor-mounted design
* Reliable, all-vacuum operatiion
* Widest choice of rotameters in the industry : large 10" scale
rotameters in 22 different capacities up to 4500 Kg/day
* Backflood protection
* Front access
* Simple interconnection of modular units forms a high-tech
panel-line array
* Available for Cl2, NH3, SO2 or CO2 feeding
5. Series 50-200 Evaporator :
An electrically heated, factory pre-wired immersed-tank
heat exchanger is provided to increase the rate of unaided gas
withdrawal from multiple containers.
Features
* Available in maximum capacities of 120, 150 and 200 Kgs/hour
CL2, SO2, or NH3
* NEMA 4 control panel with fused disconnect switch
* ASME code and Chlorine Institute recommendations conformity
6. Chloratekt-2 Chlorine Gas Leak Detector :
Water treatment and many other technical processes frequently
require the use of oxidizing gases such as chlorine or chlorine
dioxide. These gases are highly toxic and corrosive. Therefore
special precautions have to be taken in areas where such gases
are used.
Air contaminated with oxidizing gases will endanger plant personnel
and equipment. If employees are exposed to low concentrations
of these gases for extended periods, their safety threshold
limit will be reached. Higher concentrations of such gases affect
the respiratory system of the personnel and corrode machines
resulting in costly repairs.
The gas leak detector CHLORATEKT-2 monitors the concentration
of oxidizing gases in the air.it indicates leaks and alarms
the personnel in plants where chlorine or chlorine dioxide are
generated, stored or metered.
7. Deplox-3 Analyzer (Online Chlorine Residual Analyzer)
:
The Depolox-3 operates amperometrically and
measures free residual chlorine.
Features :
* An economical analyser for continuous amperometric measurement
of free chlorine in air.
* Requires no chemical reagents for free chlorine measurement.
* Included are high-low level alarms and proportional 4-20 mA
outputs for recording.
* Compact, Self-contained.
8. Wallace & Tiernan Pressure Calibration Instruments.:
Following basic types are included in our program of delivery
:
Pressure Calibration Instruments-Analogue Technique
* Precision Dial Gauges
* Precision Pneumatic Calibrators
Pressure Calibration Instruments-Digital Technique
* Digital Pressure Indicators
* Digital Pressure Controller/Calibrator
* Digital Pneumatic Testers
Pneumatic Test Benches / Calibration systems
Pneumatic Accessories
DKD-Calibrations (German Calibration Service)
|
